Load data for .400/350 Rigby N.E. + .357 | 148gr | H&N WC F Match

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.357 \| 148gr \| H&N WC F Match
Bullet Weight:	148gr \| 9.6g
Bullet Diameter:	0.357" \| 9.07mm
Bullet Length:	0.610" \| 15.5mm
Caliber:	.400/350 Rigby N.E. load data
Case Length (l3):	2.750" \| 69.8mm
Cartridge Length (C.O.L.):	2.750" \| 69.8mm
Seated Depth:	0.610" \| 15.5mm
Shank Seated Depth:	0.393" \| 10.0mm
Case Capacity:	78.0 Grains of Water \| 5.06 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7474_C654
Last updated:	2025-11-17

Load data for 44 loads in caliber .400/350 Rigby N.E. with .357 | 148gr | H&N WC F Match bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	36332	89%	**31	100%
[ADI AR 2219]*	<<locked>>	89%	36245	89%	**38	94%
Accurate 2015	<<locked>>	95%	36535	90%	**35	97%
[Accurate 2495]*	<<locked>>	97%	28282	70%	**33	93%
Alliant AR-Comp	<<locked>>	97%	33997	84%	**48	98%
Alliant Reloder-10x	<<locked>>	92%	36274	89%	**44	97%
Alliant Reloder-7	<<locked>>	84%	36390	90%	**85	98%
Baschieri & Pellagri 106	<<locked>>	87%	36216	89%	**30	95%
[Hodgdon H322]*	<<locked>>	94%	35868	88%	**31	94%
[Hodgdon H335]*	<<locked>>	89%	36085	89%	**38	92%
[Hodgdon H4198]*	<<locked>>	84%	35868	88%	**20	93%
Hodgdon TrailBoss	<<locked>>	97%	28340	70%	**37	100%
IMR 4198	<<locked>>	89%	36100	89%	**92	98%
Norma 200	<<locked>>	88%	36187	89%	**44	98%
ReloadSwiss RS 14	<<locked>>	97%	27456	68%	**73	100%
[Rottweil R 901]*	<<locked>>	96%	34838	86%	**92	92%
[SNPE Vectan SP 10]*	<<locked>>	88%	35868	88%	**31	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36289	89%	**46	92%
[Somchem S335]*	<<locked>>	97%	34853	86%	**46	93%
Vihtavuori N120	<<locked>>	87%	35940	88%	**76	100%
Vihtavuori N130	<<locked>>	93%	36521	90%	**85	97%
Vihtavuori N133	<<locked>>	96%	32851	81%	**00	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31009	76%	**03	99%
[ADI AR 2219]*	<<locked>>	82%	29066	72%	**48	90%
[Accurate 2015]*	<<locked>>	83%	23163	57%	**61	90%
[Accurate 2495]*	<<locked>>	93%	23699	58%	**82	90%
[Alliant AR-Comp]*	<<locked>>	83%	21335	53%	**21	90%
[Alliant Reloder-10x]*	<<locked>>	81%	25034	62%	**39	93%
Alliant Reloder-7	<<locked>>	81%	32489	80%	**90	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	28964	71%	**46	91%
[Hodgdon H322]*	<<locked>>	87%	28877	71%	**35	90%
[Hodgdon H335]*	<<locked>>	85%	31227	77%	**10	90%
[Hodgdon H4198]*	<<locked>>	81%	32111	79%	**28	92%
Hodgdon TrailBoss	<<locked>>	81%	21828	54%	**80	100%
IMR 4198	<<locked>>	81%	28369	70%	**79	95%
Norma 200	<<locked>>	81%	27615	68%	**15	95%
ReloadSwiss RS 14	<<locked>>	81%	21176	52%	**16	100%
[Rottweil R 901]*	<<locked>>	93%	31125	77%	**97	90%
[SNPE Vectan SP 10]*	<<locked>>	85%	31662	78%	**23	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	92%	31038	76%	**18	90%
[Somchem S335]*	<<locked>>	91%	28587	70%	**82	90%
Vihtavuori N120	<<locked>>	81%	29022	71%	**08	99%
[Vihtavuori N130]*	<<locked>>	81%	23946	59%	**38	91%
[Vihtavuori N133]*	<<locked>>	88%	24874	61%	**67	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data